2015年7月20日星期一

Spindle bearing and running

The running purpose is to make the bearing in the formal angle before, the roller and raceway contact through running, can have good conditions, to maintain the bearing contact with good accuracy, and avoid the damage of the bearing roller in the beginning due to high-speed and heavy haul when in use and the raceway, thereby improving the bearing  life and accuracy .
Because the cross roller bearings is not completely rolling contact, between the shoulder and the inner roller end the existence of sliding contact, if the condition is not good, it is easy to appear the phenomenon of occlusal damage, so more attention should be paid to this kind of bearing running.
The precision spindle bearing is the main shaft bearing of precision machine tools and similar equipment, to ensure the accuracy of its work and the use of performance of precision machine tool.

2015年4月5日星期日

Set the value of the hydraulic system and crane bearing


In general, truck crane bearing hydraulic system pressure is 18 ~ 35MPa; through a multi way reversing valve, the hydraulic cylinder, hydraulic motor actuator to perform each action.

  Thus for the fault of hydraulic system pressure is insufficient, according to the form to diagnose five institutions loop,linear plain bearings , what is the insufficiency which loop system pressure.

  For example, rod reducing pressure, pressure is not up to the allowable value, which indicates lack of telescopic crane loop system pressure. Then according to the hydraulic circuit pressure is insufficient,mobile crane bearing , according to the basic form of the pressure pump oil supply mode and the hydraulic circuit, judge which is a hydraulic pump, an overflow valve malfunction caused by insufficient pressure.



2015年4月2日星期四

Mobile crane bearing and the three oil supply


Fuel pump is three,mobile crane bearing small displacement pump as the outrigger retractable circuit and power supply circuit of rotary mechanism; the larger displacement pump for telescopic crane boom luffing loop and loop injection.( radar bearing ) The largest displacement oil pump and oil pump confluence in the larger displacement car combined control valve common power supply circuit for lifting mechanism.

  Whether two or three oil supply, oil supply,ship loader bearing the basic forms of hydraulic circuit for hydraulic pump, the pressure oil discharged a routing pressure relief valve adjustment after the return tank.


2015年3月30日星期一

Crane bearing and lack of system pressure


Insufficient pressure of automobile crane hydraulic system is mainly due to the overflow valve hydraulic pump,bearing manufacturer failure cause. Truck crane hydraulic system generally consists of two or three hydraulic pump to provide pressure oil system.

  Fuel pump is two, small displacement pump as the outrigger retractable power supply circuit,mobile crane bearing the manual reversing valve outrigger retractable loop is in place, the pressure oil enters through the center of the revolving body connector on the train combined control valve.

  Large displacement pump output pressure oil through the center of the revolving body connector also enters the pressure oil pump output bus combination valve and manipulation of small displacement confluence together for the slewing mechanism, lifting mechanism circuit loop, telescopic crane bearing boom luffing loop and loop injection.


2015年3月26日星期四

Crane bearing telescopic crane loop and lifting arm luffing loop




  • Telescopic crane loop

The hanging arm is composed of basic arm and a telescopic arm,mobile crane bearing a telescopic arm in arm in the basic set. Telescopic boom is controlled by the telescopic hydraulic cylinder and steel wire rope. In order to prevent the hanging arm falling on the mass of the balance valve, a telescopic loop.

  • The lifting arm luffing loop

The so-called amplitude hydraulic cylinder is used to change the angle of the boom.( ship loader bearing ) Luffing operation is also required to prevent the drop in weight function, therefore the lazy arm amplitude circuit is also provided with a balanced valve. Failure of truck crane bearing hydraulic system is mainly manifested in the five loop, the most common fault is the system pressure is insufficient and the hydraulic cylinder retracts.



2015年3月23日星期一

Mobile crane bearing hoisting mechanism brake system


Brake system in the lifting mechanism is arranged on the brake cylinder, so as to turn in a hydraulic motor,agricultural bearings , brake lock lifting hydraulic motor. At the same time in the brake cylinder into the oil passage is provided with a one-way throttle valve, and its role is to enable the brake brake fast, slow release the brake.

  The former is to enable the motor to brake quickly, quickly stopped falling weight. The latter is when the load lifting process again in mid air,mobile crane bearing , avoid heavy weight of the hydraulic motor drag inversion and produces transient downhill phenomenon.


2015年3月19日星期四

Hydraulic truck mobile crane bearing


Due to the arrangement of the balance valve( marine crane bearing ), so that the hydraulic motor can only have the pressure in the oil inlet of case rotation, so falling will not produce the phenomenon of nod.

  But the leakage of the hydraulic motor of the hydraulic cylinder is much larger than that when the load hanging in the air, although the balance valve is provided with a circuit,agricultural bearings  ,they may still produce the slipping phenomenon.