Self-lubricating bearing composite mosaic is a novel use of extreme pressure lubricating solid material comprising a metal substrate and embedded in the substrate the holes or grooves of the solid lubricant paste composition. In the course of friction metal substrates bear most of the load. Transferred by needle roller bearings friction, hole or slot solid lubricant or anti-friction surface to transfer, at the friction surface to form well-oiled, strong adhesion and uniform coverage of the solid transfer film, greatly reducing friction and wear. Carried out with friction, continue to provide the solid lubricant embedded in the friction surface, to ensure a good lubrication of the friction during long-term operation.
One, P117 series thrust bearing low cost, strength, wear resistance in general, suitable for a variety of submersible pump thrust bearing.
Two, COP series thrust axis low cost, suitable for small, low power lift submersible pump thrust bearing (thrust bearing outside diameter of 85mm or more, power 11km lift 65m below)
Three, PTFE series thrust bearing moderate cost, is robotics bearing the mainstream product submersible pumps used in Praise submersible pumps suitable for the next thrust bearing.
Four, S299 high strength thrust bearing higher costs, suitable for high-power high head submersible pump under the thrust bearing.
Five, S299B high strength and thrust bearings
Six, S299G high wear-resistant high-voltage current high-tech products
Seven, M120H Series graphite sintered bearing (sintered graphite impregnated with epoxy resin) low cost, suitable for all kinds of Submersible Pump 18.5KW following guide bearings.
Eight, M120B series graphite sintered bearing marine crane bearing (sintered graphite impregnated babbitt) higher costs, 18.5KW various submersible pump above the guide bearings and a variety of high-power, high-head submersible pump thrust bearing.
Nine, M102B higher (asbestos iron) cost more than submersible pumps suitable for 18.5KW guide bearings.
没有评论:
发表评论